Referenced standards
49 Commonly referenced standards
- AS/NZS 4024.1401:2014 Ergonomic principles – Terminology and examples of methods.
- AS/NZS 4024.1503:2014 Safety related parts principals of design – General principles of design.
- AS/NZS 4024.1601:2014 Design of control, interlocks and guarding – Guards, general requirements for the design and construction of fixed and movable guards.
- AS/NZS 4024.1602:2014 Interlocking devices associated with guards – Principles for design and selection.
- AS/NZS 4024.1603:2014 Design of controls, interlocks and guards – Prevention of unexpected start-up.
- AS/NZS 4024.1604:2014 Design of controls, interlocks, guarding – Emergency stop, principles for design.
- AS/NZS 4024.1701:2014 Human body measurements – Basic human body measurements for technological design.
- AS/NZS 4024.1702:2014 Human body measurements – Principles for determining the dimensions required for openings for whole body access to machinery.
- AS/NZS 4024.1703:2014 Human body measurements – Principles for determining the dimensions required for access openings.
- AS/NZS 4024.1704:2014 Human body measurements – Ergonomic Principles.
- AS/NZS 4024.1801:2014 Safety distances to prevent danger zones being reached by upper and lower limbs.
- AS/NZS 4024.1802:2014 Safety distances and safety gaps – Safety distances to prevent danger zones being reached by the lower limbs.
- AS/NZS 4024.1803:2014 Safety distances and safety gaps – Minimum gaps to prevent crushing of parts of the human body.
- AS/NZS 4024.1803:2014 Safety distances and safety gaps – Minimum gaps to prevent crushing of parts of the human body.
- AS/NZS 4024.1902:2014 Displays, controls, actuators and signals – Ergonomic requirements for the design of displays and control actuators, general principles for human interactions with displays and actuator.
- AS/NZS 4024.1903:2014 Displays, controls, actuators and signals – Ergonomic requirements for the design of displays and control actuators, control actuators.
- AS/NZS 4024.1904:2014 Displays, controls, actuators and signals – Indication, marking and actuation, requirements for visual, auditory and tactile signals.
- AS/NZS 4024.1905:2014 Displays, controls, actuators and signals – Indication, marking and actuation, requirements marking.
- AS/NZS 4024.1906:2014 Displays, controls, actuators and signals – Indication, marking and actuation, requirements the location and operation of actuators.
- AS/NZS 4024.1907:2014 Displays, controls, actuators and signals – System of auditory and visual danger and information signals.
- AS/NZS 4024.2601:2014 Design of controls, interlocks and guarding – Two-hand control devices – Functional aspects and design principles.
- ISO 10218-1:2011 Robots and robotic devices – Safety requirements for robots.
- ISO 10218-2:2011 Robots and robotic devices – Robot systems and integration